TM 9-2330-238-14
LUBRICATION
CHART
CHASSIS,
SEMITRAILER:
6-TON, 4-WHEEL,
M295A1
SEMITRAILER,
VAN: EXPANSIBLE, 6-TON, 4-WHEEL,
M313
SEMITRAILER,
VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL,
M447 AND M447C
SEMITRAILER,
VAN: REPAIR PARTS, SHOP EQUIPMENT,
6-TON,
4-WHEEL, M749
SEMITRAILER,
VAN: REPAIR PARTS STORAGE,
6-TON, 4-WHEEL
M750
Intervals
(on-condition
or hard time)
and
related
man-hour times are based on normal operation. The
man-hour time specified
is the time you need to do all
services
prescribed
for
a particular
interval.
De-
crease
the intervals
if your lubricants
are contami-
nated,
or if you
are operating
equipment
under
adverse conditions,
including
longer-than-usual
op-
erating hours. The intervals may be extended
during
periods of low activity. If extended,
adequate preser-
vation precautions
must be taken.
Dotted leader lines indicate lubrication
is required on
both sides of the equipment.
WARNING
Dry cleaning
solvent,
P-D-680,
is toxic and
flammable.
Always
wear
protective
goggles
and gloves,
and use only in a well-ventilated
area.
Avoid
contact
with
skin,
eyes,
and
clothes, and DO NOT breathe vapors. DO NOT
use near open flame or excessive
heat. The
solvent’s
flash
point
is
100°F-138°F
(38°C-59°C).
If you become dizzy while using
cleaning solvent, immediately
get fresh air and
medical
help.
If
solvent
contacts
eyes,
immediately
wash your eyes and get medical
aid.
Clean all fittings and area around lubrication
points
with dry cleaning
solvent
(Item 14, Appendix
E) or
equivalent
before lubricating
equipment.
After lubri-
cation, wipe off excess oil or grease to prevent accu-
mulation
of foreign matter.
The lowest level of maintenance
authorized
to lubri-
cate a point is indicated
in parentheses
by use of the
following:
(C) Operator/Crew;
or (O) Organizational
Maintenance.
3-2
