TM 9-2330-238-14
5-31. BONNET SIDE DOOR REPLACEMENT (M313, M447, M447C, M749, AND M750)
(Con’t).
3.
Inspect seal (2), seal strip (3), rubber strip, and gasket. If defective, drill out rivets (1 or 6) as required and
replace.
4.
Inspect rivet nuts for damage or stripped threads. If defective, drill out and replace as required.
I c.
INSTALLATION I
1.
Position hinge (14), rubber strip (11), gasket (4), and door assembly (5) in place and install screws (12) and new
Iockwashers (13) to secure door assembly.
NOTE
M313, M447, M447C, and M750, perform step 2. M749, perform step 3.
2.
Close door assembly (5) and install two screws (10), new Iockwashers (9), and grommets (8) in rivet nuts (7).
3.
Close door assembly (5) and install two screws (10) and new Iockwashers (9).
5-89
