TM 9-2330-238-14
5-12. LANDING
GEAR GEARBOX
REPAIR (EARLY MODEL)
(Con’t).
5.
6.
7.
8.
9.
10.
Drive out pin (2) and remove gear cluster (20) from crankshaft
(1).
Block or support
end of leg assembly
(7). Drive out pin (14) and remove gear cluster (19) from shaft of leg
assembly.
Remove two capscrews
(16), Iockwashers
(15), capscrew
(18), Iockwasher
(17), and gearbox base assembly
(3) from support
leg bracket
(6) and leg assembly
(7). Discard Iockwashers.
Using arbor press, remove bearing
(4) and seal (5) from gearbox base assembly
(3). Discard seal.
Remove
two capscrews
(13), Iockwashers
(12), outer bearing
block
(10), and handcrank
holder
(11) from
support
leg bracket
(6). Discard
Iockwashers.
Remove
two capscrews
(13), Iockwashers
(12), and inner bearing
block
(8) from support
leg bracket
(6).
Discard
lockwashers.
5-32
