TM 9-2330-238-14
4-82. HOOK STRIP REPLACEMENT (Con’t).
1.
Using a drill and starting with a 1/16-inch twist-drill bit, remove rivets (6) securing hookstrips (2 or 5) from doors
(3 or 4) or comer posts (1) by drilling completely through rivet (6).
Discard rivets.
2.
If necessary, increase bit size in increments up to 1/8-inch until rivet (6) is removed from hole in doors
(3 and 4) or corner posts (1).
NOTE
Hook strips are adhesive backed. For complete removal it may be necessary
to scrape hook strip from door end plate or corner post.
3.
Remove hook strips (2 or 5) from doors (3 and 4) or corner posts (1). Discard hook strips.
Change 1
4-199
