6.
TM 9-2330-238-14
4-40. BRAKE BACKING PLATE AND SUPPORT AND ADJUSTER MAINTENANCE (Con’t).
7.
8.
NOTE
Ensure that anchor pins are in place in support and adjuster assembly before it is
installed on brake backing plate.
Position each support and adjuster assembly (1) in place on backing plate (3) so starwheels 16) mesh with
adjusting gears (13) and scribe marks aline.
Install two capscrews (5) and new Iockwasher (4) to secure each supportand adjuster assembly 1) to backing
plate (3).
Install two capscrews (20) from rear of axle flange
(8), through two center mounting holes, and
secure with two nuts (18 and 22) and new
Iockwasher (19 and 21).
FOLLOW-ON TASKS:
l Install wheel cylinder (para 4-39).
TA701985
4-83
