4-78
TM 9-2330-238-14
4-38. BRAKESHOE REPLACEMENT (Con’t).
4.
Position front brakeshoe (9) on backing plate (14) and install square neck bolt (12), sleeve spacer (4),
flatwasher (3), new Iockwasher (2), and nut (1).
5.
Install connecting link (13) on front brakeshoe spring pin (8).
6.
Engage slot of connecting link (13) with pin (21) on internal Iever (1 9).
7.
Install spring tension washer (7) and flatwasher (6) on both brakeshoe spring pins (8), then secure them with
slotted washer (5) installed in groove of spring pins.
8.
Bend ends of slotted washers (5) against spring pins (8) if necessary.
9.
Install two brakeshoe return springs (22) on four spring pins (8).
FOLLOW-ON TASKS:
• install hub and brakedrum (para 4-48).
l Install wheel (para 4-49).
l Bleed hydraulic brake system (para 4-37).
l Adjust and test brakes (para 4-36).
TA701980
