TM 5-4930-244-14
5-13.
LUBE TANK - REPLACE/REPAIR.
This Task Covers:
a.
Removal
b.
Repair
c.
Installation
Initial Setup:
Tools Required
Tool Kit, General Mechanic's. Automotive (Appendix B, Section III, Item 1).
Electric Welder (Appendix B, Section III, Item 3).
Materials/Parts Required
Silicon Sealant (Appendix E, Section II, Item 6).
Nut, self-locking (Appendix H, Section II, Item 10).
Teflon Tape (Appendix E, Section II, Item 7).
Dry cleaning solvent (Appendix E, Section II, Item 3).
Equipment Condition
Unit shut down and cool.
Enclosure Removed (para 4-13)
Alcohol Injector Removed (para. 4-16).
Air Regulators Removed (para. 4-41).
Low and High Pressure Pumps Removed (para. 4-42).
A-frame Removed (para. 5-3).
References
FM 43-2, Metal Body Repair and Related Operations.
TM 9-237, Welding Theory and Application.
TM 43-0139, Painting Instruction for Field Use.
Personnel Required
4
WARNING
·
Clean up spills as soon as they occur. Spills can cause falls and serious
injuries
a.
Removal. (Refer to Figure 5-27).
NOTE
GAA Grease will have to be scooped out.
(1)
Completely drain all lubricants from lube tank (1) by removing three plugs (2) from bottom of skid (3).
(2)
Remove four nuts (4), bracket (5), and u-clamp (6) from interflex hose (7).
(3)
Remove interflex hose (7) from tube on lube tank (1) and from diverter (8).
(4)
Remove two nuts (4), bracket (5) and u-clamp (6) from interflex hose (9). (5) Remove interflex hose (9) from
diverter (8).
5-80
