TM 5-4930-244-14
e.
Fuel Filter Head.
WARNING
·
Diesel fuel is flammable. Do not smoke or use open flame when near diesel
fuel.
(1)
Removal. (Refer to Figure 5-15).
(a)
Remove fuel filter head (1) and bracket (2) from cylinder head by removing two nuts (3), two washers
(4) from two studs (5).
(b)
Remove two nuts (6), two washers (7), and two bolts (8) from bracket (2).
(c)
Remove bolt (9), two washers (10), and swivel union (11) from fuel filter head (1).
(d)
Remove union (12), and washer (13) from fuel filter head (1). Remove fuel control solenoid valve line
(14) from union (12).
(2)
Repair.
(a)
Inspect all parts for cracks, distortion and other damage. Replace parts as needed.
WARNING
·
Dry cleaning solvent is flammable. Keep solvent away from open flames or
sparks. Avoid inhaling solvent fumes or contact with skin.
(b)
Thoroughly clean fuel filter head (1) with dry cleaning solvent Dry inside with wiping rags.
(3)
Installation.
(a)
Attach fuel filter head (1) to bracket (2) by installing two bolts (8) through bracket (2) and fuel filter
head (1), securing it with two washers (7) and two nuts (6).
(b)
Install fuel filter head (1) and bracket (2) to cylinder head studs (5) and install two washers (4) and
two nuts (3).
(c)
Install bolt (9), two washers (10), and swivel union (11) into port of fuel filter head (1).
(d)
Install union (12), and washer (13) into port of fuel filter head (1). Install fuel pipe line (14) onto union
(12).
5-42
