TM 5-4930-244-14
J. Flywheel Pulley and Shaft.
(1)
Removal. (Refer to Figure 4-39.)
(a)
Using a wheel puller, pull the flywheel pulley (1) from extension shaft (4). Remove key (2) from shaft.
(b)
Remove bolts (3) to remove extension shaft (4) from flywheel (5)
(2)
Repair.
Inspect all parts for cracks, distortion or other damage. Replace parts as needed.
(3)
Installation.
(a)
Place extension shaft (4) on flywheel (5) and install bolts (3). Torque bolts to 27 Ib-ft (36 Nm).
(b)
Install key in keyway of extension shaft (4).
(c)
Press flywheel pulley (1) onto extension shaft (4).
4-123
