TM 5-4930-244-14
h. Rope Start Assembly.
(1)
Removal. (Refer to Figure 4-37).
(a)
Remove three cap screws (1) securing pulley (2) to side of engine (3).
(b)
Remove dowel (4) from engine (3) if replacement is necessary.
(2)
Repair.
Inspect all parts for damage, cracks, distortion and other damage. Replace parts as needed.
(3)
Installation.
(a)
Install dowel (4) into engine (3).
(b)
Align pulley (2) with dowel (4) and slide on.
(c)
Install three cap screws (1) through pulley (2) into engine (3). Tighten.
4-118
