TM 5-3825-230-14&P
(10)
Remove two screws (20) using a cross tip screwdriver and remove cam bearing (18).
(11)
Remove two screws (21), inner piston (22), outer pistons (23), and diaphragm (24) using a cross tip
screwdriver.
(12)
Remove two screws (25) and plate (26) using a ratchet and 5/16 in. socket.
b. Assembly.
(1)
Install plate (26) and two screws (25) using a ratchet and 5/16 in. socket.
(2)
Install diaphragm (24), outer pistons (23), inner piston (22), and two screws (21) on bearing cover (16)
using a cross tip screwdriver.
(3)
Install cam bearing (18) and two screws (20) using a cross tip screwdriver.
(4)
Slide bearing cover (16) on motor (19).
(5)
Tighten setscrew (17) using a 1/8 in. hex head wrench.
(6)
Install two screws (15) using a cross tip screwdriver.
(7)
Install seal (14) on check valve assembly (13).
(8)
Install check valve assembly (13), pump housing (12), and four screws (11) using a cross tip screwdriver.
(9)
Install two seals (10 and 9), base plate (8), spring holder (7), and spring (6).
(10)
Install pressure switch assembly (5) and two screws (3) using a cross tip screwdriver. I (11) Connect two
wires (4).
(12)
Install cover (2) and screw (1) using a cross tip screwdriver .
NOTE
Follow-on maintenance: Install spray pump (para 4-120)
END OF TASK
5-115/(5-116 blank)
