TM 5-3825-230-14&P
5-35. STARTER REPAIR (CONT).
(3)
Remove three screws (5) and solenoid (4) using
a cross tip screwdriver.
(4)
Remove spring (6) and actuator (7) by pushing
down and out.
(5)
Remove two screws (8) and two washers (9)
from starter (10) using a 9 mm open end
wrench.
(6)
Matchmark drive housing (11) and starter (10)
and separate.
(7)
Remove planetary gear cover (12), weather seal
(13), and planetary assembly (14) from drive
housing (11).
5-84
