TM 5-3825-230-14&P 2-6.    PMCS TABLE. Refer to Table 2-1 for the preventive maintenance checks and services for the sweeper. Table 2-1.  Operator Preventive Maintenance Checks and Services NOTE: Within designated interval, these checks are to be performed in the order listed. B - BEFORE D-DURING A-AFTER W-WEEKLY M-MONTHLY Procedure Equipment Is Item Interval Item To Be Check for and have repaired or Not Ready/ No. B D   A W M Inspected adjusted as necessary Available If: Exterior 1 • • General Visually inspect for damage, loose Any component is damaged or missing parts. that would impair sweeper mission. 2 • Fluid Leakage Look under sweeper for fluid Class III leakage is evident. leakage (hydraulic or water). 3 • Lights and Check condition of lights or If lights are broken or do not Reflectorsreflectors (para 3-10). work. 4 Wheels and Tires • a. Check wheels for cracks, broken, A wheel is cracked, broken, or or bent surfaces. bent. • b. Check that lugnuts are not One or more nuts or studs are damaged and are secure on the missing, broken, or bent. wheel. • c. Check tires for cuts, gouges, or Tires have cuts, gouges, or cracks. Remove any sharp objects. cracks which would result in tire failure during operation. One or more missing or unserviceable tires. • d. Check tires for obviously low air pressure, front and rear. Correct as needed, by notifying unit maintenance. 2-9