TM 5-3825-230-14&P
4-24. ENGINE REMOVAL.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-22
Engine oil drained.
Shop Equipment, Automotive Maintenance and
Para 4-98
Engine enclosure removed.
Repair; Organizational Maintenance, Common
Para 4-101
Hydraulic pump removed.
No. 1, Less Power
Para 4-57
Alternator removed.
Para 4-47
Throttle and engine cut-off
Lifting device and chains
cables disconnected.
Para 4-37
Air cleaner removed.
Materials/Parts
Para 4-42
Fuel line disconnected.
Locknuts
Para 4-81
Engine wiring tagged and
thru 4-82
removed.
Para 4-49
Fuel filter housing removed.
a. Removal
(1)
Remove four screws (1) and four locknuts
(2) from engine mounts (3) using a
ratchet, 15/16 in. socket and 15/16 in.
open end wrench.
WARNING
Engine weighs 203 lbs (92 kg). All personnel must
stand clear during lifting operations. A swinging or
shifting load may cause serious injury or death to
personnel.
(2)
Attach a suitable lifting device to angle brackets
(4) and remove engine.
b. Installation.
(1)
Attach a suitable lifting device to engine angle brackets (4) and lower engine into place
(2)
Install four screws (1) and four locknuts (2) and tighten to 152 Ib-ft (206 Nm) using a torque wrench, 15/16 in.
socket and 15/16 in. open end wrench.
4-27