TM 5-3825-230-14&P
b.
Fill.
(1)
Install washer (2) and drain plug (1).
Tighten to 66 lb-ft (89 N•m) using a torque
wrench, extension and 3/4 in. socket.
(2)
Lubricate gasket on oil filter (3) using
fresh engine oil.
(3)
Install oil filter (3) on housing (4) hand
tight, then tighten 1/3 turn using oil filter
wrench.
(4)
Remove filler cap (5).
(5)
Refer to lubrication chart (Chapter 3) and
fill engine with the proper amount and
grade of oil.
(6)
Replace filler cap (5).
(7)
Start engine to circulate oil (para 2-8).
Stop engine (para 2-8).
(8)
Remove engine oil dipstick (6) and check
engine oil level.
(9)
Replace dipstick (6).
NOTE
Follow-on Maintenance:
• Close left and right access
covers (para 3-5)
• Install top access panel (para 4-
98)
END OF TASK
4-23
