TM 5-3805-296-23-6
0433
MAIN RELIEF VALVE PRESSURE TEST/ADJUST CONTINUED
10. Remove cap (Figure 4, Item 2) from retainer assembly (Figure 4, Item 1).
NOTE
Do not allow retainer assembly to turn when loosening or tightening nut on main relief
valve.
11. Loosen nut (Figure 4, Item 3), turn retainer assembly (Figure 4, Item 1) as necessary to bring pressure
difference into specification, and tighten nut.
12. Install cap (Figure 4, Item 2) on retainer assembly (Figure 4, Item 1).
Figure 4. Adjusting Main Relief Valve.
0433
13. Repeat steps 3 through 9.
END OF TASK
FOLLOW-ON TASKS
000433
Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
0433-7/(8 blank)