TM 5-3805-296-23-6
0395
REMOVAL CONTINUED
7. Loosen tube nut (Figure 2, Item 3) and remove elbow (Figure 2, Item 2) and fitting (Figure 2, Item 1) from
secondary steering pump outlet screen (Figure 2, Item 5).
8. Remove O-ring (Figure 2, Item 4) from secondary steering pump outlet screen (Figure 2, Item 5). Discard
O-ring.
9. Loosen tube nut (Figure 2, Item 6) and remove elbow (Figure 2, Item 2) from fitting (Figure 2, Item 1).
10. Remove O-ring (Figure 2, Item 7) from fitting (Figure 2, Item 1). Discard O-ring.
11. Remove dust cap (Figure 2, Item 10) from fitting (Figure 2, Item 9).
12. Remove fitting (Figure 2, Item 9) from fitting (Figure 2, Item 1).
13. Remove O-ring (Figure 2, Item 8) from fitting (Figure 2, Item 9). Discard O-ring.
Figure 2. Hose Fittings.
0395
END OF TASK
CLEANING AND INSPECTION
000395
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000395
1. Install new O-ring (Figure 2, Item 8) on fitting (Figure 2, Item 9).
2. Install fitting (Figure 2, Item 9) on fitting (Figure 2, Item 1).
3. Instal dust cap (Figure 2, Item 10) on fitting (Figure 2, Item 9).
4. Install new O-ring (Figure 2, Item 7) on fitting (Figure 2, Item 1).
5. Install elbow (Figure 2, Item 2) on fitting (Figure 2, Item 1). Tighten tube nut (Figure 2, Item 6).
6. Install new O-ring (Figure 2, Item 4) on secondary steering pump outlet screen (Figure 2, Item 5).
7. Install elbow (Figure 2, Item 2) and fitting (Figure 2, Item 1) on secondary steering pump outlet screen
(Figure 2, Item 5). Tighten tube nut (Figure 2, Item 3).