TM 5-3805-296-23-6
0393
REMOVAL CONTINUED
NOTE
Tag and mark wiring harness connectors to aid in installation.
5. Disconnect machine wiring harness connector (Figure 3, Item 9) from sensor wiring harness connector
(Figure 3, Item 8).
6. Remove four bolts (Figure 3, Item 2), washers (Figure 3, Item 3), sensor wiring harness connector bracket
(Figure 3, Item 7), two flange halves (Figure 3, Item 4), and hydraulic hose (Figure 3, Item 1) from hydraulic
and steering pump manifold (Figure 3, Item 5).
7. Remove O-ring (Figure 3, Item 6) from hydraulic hose (Figure 3, Item 1). Discard O-ring.
Figure 3. Right Lower Hydraulic Hose.
0393