TM 5-3805-296-23-6
0389
REMOVAL CONTINUED
NOTE
Note orientation and location of P-clamps to aid in installation.
Tag and mark wiring harness connectors to aid in installation.
Note routing of wiring harness to aid in installation.
20. Disconnect hood wiring harness connector (Figure 8, Item 5) from tractor ground level shutdown switch wiring
harness connector (Figure 8, Item 4).
21. Remove two bolts (Figure 8, Item 1), washers (Figure 8, Item 2), P-clamps (Figure 8, Item 3) and hood wiring
harness (Figure 8, Item 7) from front hood support (Figure 8, Item 6).
22. Remove hood wiring harness (Figure 8, Item 7) from machine.
Figure 8. P-Clamps and Hood Wiring Harness.
0389
END OF TASK
CLEANING AND INSPECTION
000389
1. Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
2. Clean and inspect all components IAW Electrical General Maintenance Instructions (WP 0540).
END OF TASK
