TM 5-3805-296-23-5
0358
INSTALLATION CONTINUED
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
5. Apply sealant to air line (Figure 5, Item 1), install air line on fitting (Figure 5, Item 3), tighten tube nut
(Figure 5, Item 2).
Figure 5. Check Valve Air Lines.
0358
6. Start engine and allow air pressure to build (TM 5-3805-296-10).
7. Apply parking brake (TM 5-3805-296-10).
8. Turn engine off (TM 5-3805-296-10).
END OF TASK
FOLLOW-ON TASKS
000358
1.
Crankcase guard raised (WP 0374).
2. Remove wheel chocks (WP 0454).
3. Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
0358-7/(8 blank)