TM 5-3805-296-23-5
0357
INSTALLATION
000357
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
NOTE
Remove plugs and caps from fittings.
Install fittings as noted during removal.
1. Apply sealant to fitting (Figure 5, Item 1), install fitting on safety release valve (Figure 5, Item 2).
2. Apply sealant to fitting (Figure 5, Item 3), install fitting on safety release valve (Figure 5, Item 2).
Figure 5. Safety Release Valve Fittings.
0357
