TM 5-3805-296-23-5
0348
INSTALLATION CONTINUED
NOTE
Install wiring harness as tagged and marked during removal.
Install wiring harness as noted during removal.
Install P-clamp as noted during removal.
32. Install clamp (Figure 52, Item 9), P-clamp (Figure 52, Item 2), washer (Figure 52, Item 1), and bolt
(Figure 52, Item 3) on machine.
33. Install two P-clamps (Figure 52, Item 8), washers (Figure 52, Item 6), and bolts (Figure 52, Item 7) on machine.
34. Connect wring harness connector (Figure 52, Item 4) to bowl flood lamp (Figure 52, Item 5).
Figure 52. Bowl Flood Lamp Connector.
0348
END OF TASK
FOLLOW-ON TASKS
000348
1. Install rear main control valve (WP 0452).
2. Install right side scraper line guards (WP 0431).
3. Install rear hood (WP 0386).
4. Install rear access panels (WP 0449).
5. Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
