TM 5-3805-296-23-5
0344
INSTALLATION
000344
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
NOTE
Air lines must be connected to original ports on brake air supply solenoid.
1. If installing new scraper park brake solenoid, go to step 2. Otherwise, go to step 4.
2. Verify port 1 (Figure 6, Item 3) and port 2 (Figure 6, Item 1) on new scraper park brake solenoid (Figure 6,
Item 4) are in same position as ports 1 and 2 on original scraper park brake solenoid.
3. If port 1 (Figure 6, Item 3) and port 2 (Figure 6, Item 1) are not correctly aligned on new scraper park brake
solenoid (Figure 6, Item 4), loosen nut (Figure 6, Item 5), and rotate valve (Figure 6, Item 2) until port 1 and
port 2 are in correct position, then tighten nut.
Figure 6. Air Port Position.
0344