TM 5-3805-296-23-5
0337
REMOVAL
000337
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in equipment damage.
NOTE
Tag and mark wiring harness connectors to aid with installation.
1. Disconnect machine wiring harness connector (Figure 1, Item 8) from scraper air pressure sensor
connector (Figure 1, Item 1).
2. Remove bolt (Figure 1, Item 6), washer (Figure 1, Item 5), bracket (Figure 1, Item 2), clamp (Figure 1, Item 3)
and relay (Figure 1, Item 4) from mounting boss (Figure 1, Item 7) and position aside.
Figure 1. Air Pressure Sensor Relay.
0337