TM 5-3805-296-23-5
0327
REMOVAL
000327
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
CAUTION
Plug and cap all hydraulic hoses and fittings to prevent contamination.
NOTE
Tag and mark all hoses to aid in installation.
Note routing of hose to aid in installation.
1. Loosen tube nut (Figure 1, Item 4) and remove hose (Figure 1, Item 3) and O-ring (Figure 1, Item 5) from fitting
(Figure 1, Item 6). Discard O-ring.
2. Remove four bolts (Figure 1, Item 8), washers (Figure 1, Item 9), two flange halves (Figure 1, Item 2), hose
(Figure 1, Item 3) and O-ring (Figure 1, Item 1) from pump (Figure 1, Item 7) and machine. Discard O-ring.
0327-2