TM 5-3805-296-23-5
0303
REMOVAL CONTINUED
7. Remove bolt (Figure 4, Item 1), washer (Figure 4, Item 2), clamp (Figure 4, Item 3), grommet (Figure 4, Item 4),
and hydraulic hose (Figure 4, Item 5) from frame (Figure 4, Item 6).
8. Remove clamp (Figure 4, Item 3) and grommet (Figure 4, Item 4) from hydraulic hose (Figure 4, Item 5).
9. Loosen tube nut (Figure 4, Item 7) and remove hydraulic hose (Figure 4, Item 5) from elbow fitting
(Figure 4, Item 9).
10. Remove O-ring (Figure 4, Item 8) from elbow fitting (Figure 4, Item 9). Discard O-ring.
11. Remove hydraulic hose (Figure 4, Item 5) from machine.
Figure 4. Below Engine.
0303
END OF TASK
CLEANING AND INSPECTION
000303
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK