TM 5-3805-296-23-5
0302
REMOVAL
000302
NOTE
Procedure to remove left and right steering servo hoses and lines is identical. Right side is
shown.
1. Remove six bolts (Figure 1, Item 1), washers (Figure 1, Item 2), and step (Figure 1, Item 3) from cab
(Figure 1, Item 4).
Figure 1. Cab Step.
0302
2. Remove four bolts (Figure 2, Item 1), washers (Figure 2, Item 2), spacers (Figure 2, Item 3), and splash guard
(Figure 2, Item 4) from cab.
WARNING
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
To prevent injury to personnel, wear protective eye covering and gloves.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Cap and plug hose and fittings to prevent contamination.
