TM 5-3805-296-23-5
0300
INSTALLATION CONTINUED
NOTE
Install hydraulic hose as tagged during removal.
Remove plugs and caps from hydraulic hoses and fittings.
7. Install new O-ring (Figure 7, Item 3) on fitting (Figure 7, Item 2).
8. Install hydraulic hose (Figure 7, Item 1) on fitting (Figure 7, Item 2) on steering control valve, tighten tube nut
(Figure 7, Item 4).
9. Install splash guard (Figure 7, Item 5), four spacers (Figure 7, Item 6), washers (Figure 7, Item 7) and bolts
(Figure 7, Item 8) on cab.
Figure 7. Below Cab.
0300
END OF TASK