TM 5-3805-296-23-4
0285
REMOVAL CONTINUED
7. Remove locknut (Figure 4, Item 5) and retainer (Figure 4, Item 4) from bottom of oil filter element
(Figure 4, Item 3). Discard locknut.
8. Remove oil filter element (Figure 4, Item 3) from oil filter cover (Figure 4, Item 1). Discard oil filter.
9. Remove two O-rings (Figure 4, Item 2) from oil filter cover (Figure 4, Item 1). Discard O-rings.
Figure 4. Transmission Oil Filter Cover Assembly.
0285
END OF TASK
CLEANING AND INSPECTION
000285
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000285
1. Lubricate new O-rings (Figure 5, Item 2) with transmission fluid before installation.
2. Install two new O-rings (Figure 5, Item 2) on oil filter cover (Figure 5, Item 1).
3. Install new oil filter element (Figure 5, Item 3) on oil filter cover (Figure 5, Item 1).
4. Install retainer (Figure 5, Item 4) and new locknut (Figure 5, Item 5) on bottom of oil filter element
(Figure 5, Item 3).
Figure 5. Transmission Oil Filter Cover Assembly.
0285
