TM 5-3805-296-23-4
0284
REMOVAL
000284
1. Loosen clamp (Figure 1, Item 12) and remove boot (Figure 1, Item 11) from adapter (Figure 1, Item 9).
2. Loosen tube nut (Figure 1, Item 5) and remove hose (Figure 1, Item 6) and O-ring (Figure 1, Item 4) from fitting
(Figure 1, Item 3). Discard O-ring.
NOTE
Note orientation of fitting to aid installation.
3. Loosen jam nut (Figure 1, Item 2) and remove fitting (Figure 1, Item 3) and O-ring (Figure 1, Item 1) from
adapter (Figure 1, Item 9). Discard O-ring.
4. Remove six nuts (Figure 1, Item 7), washers (Figure 1, Item 8), adapter (Figure 1, Item 9), and O-ring
(Figure 1, Item 10) from machine. Discard O-ring.
Figure 1. Driveshaft Boot and Adapter.
0284
