TM 5-3805-296-23-4
0281
REMOVAL CONTINUED
14. Remove test port (Figure 8, Item 1) from test port block (Figure 8, Item 3).
15. Remove O-ring (Figure 8, Item 2) from test port (Figure 8, Item 1). Discard O-ring.
Figure 8. Test Port.
0281
END OF TASK
CLEANING AND INSPECTION
000281
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000281
1. Install new O-ring (Figure 8, Item 2) on test port (Figure 8, Item 1).
2. Install test port (Figure 8, Item 1) on test port block (Figure 8, Item 3).
