TM 5-3805-296-23-4
0280
BOWL CYLINDER PILOT HOSE REMOVAL CONTINUED
CAUTION
Plug and cap all hydraulic hoses, lines, and fittings to prevent contamination. Failure to
follow this caution may result in damage to equipment.
NOTE
Tag and mark hydraulic hoses and lines to aid in installation.
Note routing and location of hydraulic hoses and lines to aid in installation.
Note location of clamp to aid in installation.
7. Loosen tube nut (Figure 20, Item 2) and remove hose (Figure 20, Item 1) from fitting (Figure 20, Item 6).
8. Remove O-ring (Figure 20, Item 11) from fitting (Figure 20, Item 6). Discard O-ring.
9. Loosen tube nut (Figure 20, Item 4) and remove hose (Figure 20, Item 5) from fitting (Figure 20, Item 3).
10. Remove O-ring (Figure 20, Item 9) from fitting (Figure 20, Item 3). Discard O-ring.
11. Loosen tube nut (Figure 20, Item 8) and remove hose (Figure 20, Item 7) from fitting (Figure 20, Item 12).
12. Remove O-ring (Figure 20, Item 10) from fitting (Figure 20, Item 12). Discard O-ring.
0280-26