TM 5-3805-296-23-4
0279
HITCH LINES REMOVAL
000279
NOTE
Tag and mark all hoses and lines to aid in installation.
Plug and cap all hydraulic hoses, lines and fittings to prevent contamination.
1. Remove four bolts (Figure 12, Item 8), washers (Figure 12, Item 7), split flange halves
(Figure 12, Item 2), draft frame hose (Figure 12, Item 1), and spacer (Figure 12, Item 3) from hitch line
(Figure 12, Item 4).
2. Remove O-ring (Figure 12, Item 6) from draft frame hose (Figure 12, Item 1), and remove O-ring (Figure 12,
Item 5) from spacer (Figure 12, Item 3). Discard O-rings.
Figure 12. Hitch Line.
0279
