TM 5-3805-296-23-4
0272
REMOVAL
000272
WARNING
Lubricating/hydraulic oils can be very slippery. Have drain pan readily available.
Immediately wipe up any spills. Failure to follow this warning may result in injury or death
to personnel.
CAUTION
Plug and cap hoses and fittings to prevent contamination.
NOTE
Tag and mark hoses to aid in installation.
Note routing of hoses to aid in installation.
1. Loosen tube nut (Figure 1, Item 4) and remove hose (Figure 1, Item 6) and O-ring (Figure 1, Item 3)
from fitting (Figure 1, Item 12). Discard O-ring.
2. Loosen tube nut (Figure 1, Item 8) and remove hose (Figure 1, Item 7) and O-ring (Figure 1, Item 9) from fitting
(Figure 1, Item 11). Discard O-ring.
3. Remove jam nut (Figure 1, Item 5) and fitting (Figure 1, Item 12) from bracket (Figure 1, Item 2).
4. Remove jam nut (Figure 1, Item 10) and fitting (Figure 1, Item 11) from bracket (Figure 1, Item 2).
5. Remove two bolts (Figure 1, Item 1), washers (Figure 1, Item 13), and bracket (Figure 1, Item 2) from machine.
0272-2