TM 5-3805-296-23-4
0243
INSTALLATION CONTINUED
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
NOTE
Perform steps 39 to install and assemble fittings if removed.
Install fittings as noted during removal.
3. Apply sealing compound to threads on fittings (Figure 13, Item 5).
4. Install fitting (Figure 13, Item 5) on T-fitting (Figure 13, Item 6).
5. Apply sealing compound to threads on drain valve (Figure 13, Item 2).
6. Install drain valve (Figure 13, Item 2) from T-fitting (Figure 13, Item 6).
7. Apply sealing compound to threads on T-fitting (Figure 13, Item 6).
8. Install T-fitting (Figure 13, Item 6) on transmission oil cooler cover (Figure 13, Item 1).
9. Install drain hose (Figure 13, Item 4) and clamp (Figure 13, Item 3) on drain valve (Figure 13, Item 2).
Figure 13. Fittings.
0243
