TM 5-3805-296-23-4
0229
FUEL RETURN LINE REMOVAL CONTINUED
Figure 20. Fuel Transfer Pump and Fuel Return Hose.
0229
END OF TASK
CLEANING AND INSPECTION
000229
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
FUEL RETURN LINE INSTALLATION
000229
NOTE
Remove plugs and caps from fuel hoses and fittings.
Install fuel hoses as tagged and marked during removal.
Install fittings as noted during removal.
1. Install new O-ring (Figure 20, Item 5) on fitting (Figure 20, Item 4).
2. Install fuel transfer pump fuel return hose (Figure 20, Item 2) on machine.
3. Install fuel transfer pump fuel return hose (Figure 20, Item 2) on fitting (Figure 20, Item 1) and tighten tube nut
(Figure 20, Item 3).
