TM 5-3805-296-23-2
0107
Table 1. Excessive Engine Oil Consumption Continued.
0107
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Excessive Engine Oil
3. If lowered, install left frame access
Consumption Continued
plate (WP 0376).
4. If lowered, install plate and
crankcase guard (WP 0374).
5. If removed, install turbo and
exhaust heat shields (WP 0206).
6. If removed, install rear hood
(WP 0386).
7. Start and operate engine at
various speeds and loads until
engine coolant temperature
reaches normal operating
temperature (TM 5-3805-296-10).
8. Turn ignition switch and battery
disconnect switch to off position
(TM 5-3805-296-10).
9. Walk around tractor and look for
No Leaks Found Proceed to step 10.
signs of Class III leaks.
Leaks Found Repeat troubleshooting
from the beginning.
10. Check level of engine oil in
Oil Level Between L and F Marks
crankcase (TM 5-3805-296-10).
Troubleshooting Complete.
Oil level should be visible between
Oil Level Below L Mark Repeat
L and F marks (Figure 13, Item 2)
troubleshooting from the beginning.
on oil level gauge
(Figure 13, Item 1).
0107-14