TM 5-3805-296-23-2
0103
Table 1. Engine Cranks But Will Not Start Continued.
0103
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine Cranks But Will Not
2. At MSD, check for active event
Event Code(s) Active Diagnose and
Start Continued
code(s) (WP 0008).
repair active event code(s) (WP 0005).
Proceed to Test Step 11.
No Event Code(s) Active Proceed to
Test Step 5.
Test Step 5. Check Starting Aid.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Check for missing or empty ether
Ether Cylinder OK Proceed to Test
cylinder (TM 5-3805-296-10).
Step 6.
Ether Cylinder Missing or Empty
Replace ether cylinder
(TM 5-3805-296-10).
Proceed to Test Step 11.
Test Step 6. Test Injector Electrical
Circuit Function.
1. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
2. Connect MSD (WP 0008). Select
C15 620.
3. On MSD, select Diagnostics
(Figure 1, Item 1) and Diagnostic
Tests (Figure 1, Item 2).
Figure 1. Selecting Diagnostic Tests.
0103
