TM 5-3805-296-23-1
0061
Table 1. 0590 Communication Diagnostic Codes Continued.
061
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
2. Lower left frame access plate
0590-12 Wrong Response
From Engine Control Module
(WP 0376).
3. Remove four bolts
Continued
(Figure 23, Item 1), washers
(Figure 23, Item 2), bushings
(Figure 23, Item 3), and splash
shield (Figure 23, Item 4) from
machine.
Figure 23. Splash Shield and Retaining Hardware.
0061
4. Disconnect connector CL-C1
(WP 0012, Figure 45) from engine
ECM.
5. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
6. Using digital multimeter
Voltage 18 to 25 V Proceed to step 7.
(WP 0540), test for voltage
Voltage Less Than 18 V Proceed to
between CL-C1 terminal 48
Test Step 7.
(WP 0012, Figure 45) and ground.
7. Using digital multimeter
Voltage 18 to 25 V Proceed to step 8.
(WP 0540), test for voltage
Voltage Less Than 18 V Proceed to
between CL-C1 terminal 52
Test Step 7.
(WP 0012, Figure 45) and ground.
8. Using digital multimeter
Voltage 18 to 25 V Proceed to Test
(WP 0540), test for voltage
Step 6.
between CL-C1 terminal 53
Voltage Less Than 18 V Proceed to
WP 0012, Figure 45) and ground.
Test Step 7.