TM 5-3805-296-23-1
0034
Table 1. 0342 Engine Speed Sensor Diagnostic Code Continued.
034
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
5. Disconnect connector CM-C1
0342-08 Secondary Engine
(WP 0012, Figure 30) from engine
Speed Sensor Abnormal
ECM.
Frequency, Pulse Width, or
Period Continued
6. Using digital multimeter
Resistance 1000 to 1200 Ohms
(WP 0540), measure resistance
Replace engine ECM (WP 0252).
between connector CM-C1
Proceed to Test Step 9.
terminal 46 and terminal 47
Resistance Less Than 1000 Ohms
(WP 0012, Figure 30).
Replace camshaft speed timing sensor
(WP 0221).
Proceed to Test Step 9.
Resistance Greater Than 1200 Ohms
Replace camshaft speed timing
sensor (WP 0221).
Proceed to Test Step 9.
Test Step 6. Test for Shorted Basic
Engine Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Lower left frame access plate
(WP 0376).
3. Remove four bolts
(Figure 4, Item 1), washers
(Figure 4, Item 2), bushings
(Figure 4, Item 3), and splash
shield (Figure 4, Item 4) from
machine.
Figure 4. Splash Shield and Retaining Hardware.
0034
4. Disconnect connector CL-C1
(WP 0012, Figure 45) from engine
ECM.