TM 5-3805-296-23-1
0015
Table 1. 0003 Fuel Injector Diagnostic Codes Continued.
015
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Verify Malfunction is
0003-06 Cylinder #3 Injector
Resolved.
Current Above Normal
1. Ensure all harness connectors are
Continued
connected.
2. Ensure valve cover is installed on
engine (WP 0182).
3. Turn battery disconnect switch to
ON position and start engine or
attempt to start engine
(TM 5-3805-296-10).
4. At MSD, check for active
3-6 Cylinder #3 Injector Current
Above Normal Becomes Inactive
diagnostic codes (WP 0008).
Proceed to step 5.
3-6 Cylinder #3 Injector Current
Above Normal Remains Active
Repeat troubleshooting from the
beginning.
5. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
6. If removed, install splash shield
(Figure 10, Item 4), four bushings
(Figure 10, Item 3), washers
(Figure 10, Item 2), and bolts
(Figure 10, Item 1) on machine.
Figure 10. Splash Shield and Retaining Hardware.
0015
7. If lowered, install left frame access
plate (WP 0376).
8. Troubleshooting complete.
END OF WORK PACKAGE
