TM 5-3825-230-14&P
(2)
Remove two nuts (3), two lockwashers (4), two washers (5), two screws (6), and snubber bracket (7) using a 9/16
in. open end wrench, ratchet and 9/16 in. socket.
(3)
Remove two screws (8) and two carriage washers (9) from brush frame (10) using a ratchet and 1-1/16 in.
socket.
b. Installation.
(1)
Install snubber bracket (7) using two screws (6), two washers (5), two lockwashers (4), and two locknuts (3).
Tighten using a 9/16 in. open end wrench, ratchet and 9/16 in. socket
(2)
Install two screws (8) and two carriage washers (9) on brush frame (10) using a ratchet and 1-1/6 in. socket.
(3)
Install brush frame assembly on swing frame (11) using two washers (2) and two locknuts (1).
NOTE
Follow-on maintenance:
Install brush (para 4-117)
Install hydraulic motor (para 4-102)
Connect hydraulic hoses (para 4-105)
Connect broom hood wiring harness (para 4-78)
END OF TASK
4-205