BOWL CYLINDER HOSES AND LINES REMOVAL
Plug and cap all hydraulic hoses lines, and fittings to prevent contamination.
This procedure is for right bowl cylinder hoses. Follow same steps for left bowl cylinder
Tag and mark hydraulic hoses and lines to aid in installation.
Note routing and location of hydraulic hoses and lines to aid in installation.
16. Remove four bolts (Figure 8, Item 1), washers (Figure 8, Item 4), two flange halves (Figure 8, Item 2), and
hydraulic hose (Figure 8, Item 3) from right quick drop valve (Figure 8, Item 5).
17. Remove O-ring (Figure 8, Item 6) from hydraulic hose (Figure 8, Item 3). Discard O-ring.
Figure 8. Right Cylinder Down Connection.