TM 5-3805-296-23-6
0414
REMOVAL CONTINUED
000414
NOTE
Note position of fittings to aid in installation.
5. Loosen jam nut (Figure 3, Item 3) and remove fitting (Figure 3, Item 2) and O-ring (Figure 1, Item 4) from
shuttle valve (Figure 3, Item 1). Discard O-ring.
6. Loosen jam nut (Figure 3, Item 5) and remove fitting (Figure 3, Item 6) and O-ring (Figure 3, Item 7) from fitting
(Figure 3, Item 8). Discard O-ring.
7. Loosen jam nut (Figure 3, Item 11) and remove fitting (Figure 3, Item 12) and O-ring (Figure 3, Item 10) from
fitting (Figure 3, Item 9). Discard O-ring.
Figure 3. Fittings.
0414
END OF TASK
CLEANING AND INSPECTION
000414
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK