TM 5-3805-296-23-6
0413
REMOVAL CONTINUED
000413
NOTE
Note position of fittings to aid in installation.
5. Loosen jam nut (Figure 3, Item 3) and remove fitting (Figure 3, Item 2) and O-ring (Figure 3, Item 4) from
shuttle valve (Figure 3, Item 1). Discard O-ring.
6. Loosen jam nut (Figure 3, Item 5) and remove fitting (Figure 3, Item 6) and O-ring (Figure 3, Item 7) from fitting
(Figure 3, Item 8). Discard O-ring.
7. Loosen jam nut (Figure 3, Item 11) and remove fitting (Figure 3, Item 12) and O-ring (Figure 3, Item 10) from
fitting (Figure 3, Item 9). Discard O-ring.
Figure 3. Fittings.
0413
END OF TASK
CLEANING AND INSPECTION
000413
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000413
NOTE
Install fittings as noted during removal.
1. Install new O-ring (Figure 3, Item 10) and fitting (Figure 3, Item 12). Tighten jam nut (Figure 3, Item 11) on
fitting (Figure 3, Item 9).
2. Install new O-ring (Figure 3, Item 7) and fitting (Figure 3, Item 6). Tighten jam nut (Figure 3, Item 5) on fitting
(Figure 3, Item 8).
3. Install new O-ring (Figure 3, Item 4) and fitting (Figure 3, Item 2). Tighten jam nut (Figure 3, Item 3) on shuttle
valve (Figure 3, Item 1).