TM 5-3805-296-23-6
0399
INSTALLATION CONTINUED
NOTE
Install wiring harness connector as noted during removal.
4. Connect secondary steering flow switch connector (Figure 4, Item 3) to secondary steering wiring harness
connector (Figure 4, Item 2).
5. Install secondary steering flow switch connector (Figure 4, Item 3) on retainer clip (Figure 4, Item 1).
Figure 4. Secondary Steering Flow Switch Wiring Harness Connector.
0399
END OF TASK
FOLLOW-ON TASKS
000399
1. Fill hydraulic system (WP 0325).
2. Remove wheel chocks (WP 0454).
3. Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE