LEFT FENDER REMOVAL CONTINUED
9. Remove three bolts (Figure 7, Item 3), locknuts (Figure 7, Item 5), and washers (Figure 7, Item 2) from left
fender (Figure 7, Item 1) and bracket (Figure 7, Item 4). Discard locknuts.
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
Left fender weighs 225 lb (102 kg).
10. Using lifting device and assistance, remove left fender (Figure 7, Item 1) from machine, and place left fender
on level surface.
Figure 7. Rear Corner Bracket.