TM 5-3805-296-23-5
0371
INSTALLATION CONTINUED
14. Using caliper, measure new shim pack (Figure 10, Item 5). Remove shims as required to attain required
thickness.
15. Install shim pack (Figure 10, Item 5) on retainer (Figure 10, Item 2).
16. Install new O-ring (Figure 10, Item 6) on retainer (Figure 10, Item 2).
17. Install retainer (Figure 10, Item 2), six washers (Figure 10, Item 4), and bolts (Figure 10, Item 3) on rear tire
wheel assembly (Figure 10, Item 1). Tighten bolts to 26 lb-ft (35 Nm).
18. Remove lifting device and chains from wheel (Figure 10, Item 1).
NOTE
Alternate between rotating wheel and tighten bolts. Rotate wheel at least on revolution
between bolts.
19. Tighten six bolts (Figure 10, Item 3) to 200 lb-ft (271 Nm) while rotating wheel (Figure 10, Item 1).
Figure 10. Retainer.
0371