Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
Install check valve as noted during removal.
3. Apply sealant to check valve (Figure 4, Item 1), install check valve on junction block (Figure 4, Item 2).
Figure 4. Check Valve.
Remove plugs and caps from air hose, line and fittings.
Install air hose and line as tagged and marked during removal.
4. Install air hose (Figure 5, Item 6) on fitting (Figure 5, Item 4), tighten tube nut (Figure 5, Item 5).