Tag and mark hose to aid in installation.
Note routing of hoses and lines to aid in installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
3. Loosen tube nut (Figure 2, Item 5) and disconnect hydraulic hose (Figure 2, Item 7) from steering control valve
fitting (Figure 2, Item 8).
4. Remove O-ring (Figure 2, Item 6) from fitting (Figure 2, Item 8). Discard O-ring.
Figure 2. Steering Control Valve.